Structural,optical and magnetic properties of chromium and manganese co-doped SnO2 nanoparticles

The rutile phase Sn_0.99-xMn_xCr_0.01O₂ (x = 0.00, 0.01, 0.03, 0.05 and 0.07) nanoparticles were synthesized by facile chemical co-precipitation method using poly ethylene glycol (PEG) as a capping agent. The samples were characterized by EDAX to confirm the expected stoichiometry. The X-ray diffraction (XRD), transmission electron microscopy (TEM) and Fourier transform infrared (FTIR) spectroscopy analyses of these samples showed the formation of impurity free crystals with a single phase rutile type tetragonal crystal structure as that of (P4₂/mnm) of SnO₂. Optical absorption spectra and corresponding Tauc's plots showed a redshift of the absorption edge in SnO₂ after being co-doped with Cr and Mn. The samples were examined for its magnetic property using vibrating sample magnetometer which indicated that transition of magnetic signals from ferromagnetic to the paramagnetic nature with inclusion of Mn content in SnO₂: Cr host matrix. The observed magnetic behavior is well supported with the bound magnetic polarons (BMPs) model.     

Improving the impact property and heat‐resistance of PLA/PC blends through coupling molecular chains at the interface

The influences of both the molecular structure and the melt viscosity differences between Poly(lactic acid) (PLA) and polycarbonate (PC) on the interpenetration of molecular chains at the interface were investigated by comparing the dynamic mechanical properties and morphologies of the as‐prepared PLA/PC solution‐casting blends with those of their corresponding annealed (180°C, 8 h) samples or PLA/PC melt blends. Additionally, two chain extenders containing epoxy groups (ADR and TGDDM) were used to improve the interfacial strength. Subsequently, the interpenetration of PLA and PC molecular chains at the interface was also surveyed. Finally, the effects of the morphology formed by after adding ADR or TGDDM on the impact property, and heat resistance were discussed. The results showed that there was no interpenetration of molecular chains at the interface in PLA/PC melt blends because of the serious hindrance of the molecular structure and the melt viscosity differences. Although the interfacial strength achieved significant increase after adding ADR or TGDDM, the increase of the interfacial strength should be caused by the connection of ADR or TGDDM molecules with PLA and PC molecules at the interface through chemical bonds rather than the entanglements of PLA and PC molecular chains because of no interpenetration of PLA and PC molecular chains at the interface. Thus, the morphology formed after adding ADR or TGDDM is still the type of complete phase separation, which may be the most suitable morphology for achieving high impact and heat resistance PLA/PC blends because these two properties strongly depend on the crystallinity of PLA phase. Copyright © 2015 John Wiley & Sons, Ltd.     

Effects of GC temperature and carrier gas flow rate on on‐line oxygen isotope measurement as studied by on‐column CO injection

Although deemed important to δ¹⁸O measurement by on‐line high‐temperature conversion techniques, how the GC conditions affect δ¹⁸O measurement is rarely examined adequately. We therefore directly injected different volumes of CO or CO–N₂ mix onto the GC column by a six‐port valve and examined the CO yield, CO peak shape, CO–N₂ separation, and δ¹⁸O value under different GC temperatures and carrier gas flow rates. The results show the CO peak area decreases when the carrier gas flow rate increases. The GC temperature has no effect on peak area. The peak width increases with the increase of CO injection volume but decreases with the increase of GC temperature and carrier gas flow rate. The peak intensity increases with the increase of GC temperature and CO injection volume but decreases with the increase of carrier gas flow rate. The peak separation time between N₂ and CO decreases with an increase of GC temperature and carrier gas flow rate. δ¹⁸O value decreases with the increase of CO injection volume (when half m/z 28 intensity is <3 V) and GC temperature but is insensitive to carrier gas flow rate. On average, the δ¹⁸O value of the injected CO is about 1‰ higher than that of identical reference CO. The δ¹⁸O distribution pattern of the injected CO is probably a combined result of ion source nonlinearity and preferential loss of C¹⁶O or oxygen isotopic exchange between zeolite and CO. For practical application, a lower carrier gas flow rate is therefore recommended as it has the combined advantages of higher CO yield, better N₂–CO separation, lower He consumption, and insignificant effect on δ¹⁸O value, while a higher‐than‐60 °C GC temperature and a larger‐than‐100 µl CO volume is also recommended. When no N₂ peak is expected, a higher GC temperature is recommended, and vice versa. Copyright © 2015 John Wiley & Sons, Ltd.     

Ba3P5N10Br:Eu2+: A Natural‐White‐Light Single Emitter with a Zeolite Structure Type

Illumination sources based on phosphor‐converted light emitting diode (pcLED) technology are nowadays of great relevance. In particular, illumination‐grade pcLEDs are attracting increasing attention. Regarding this, the application of a single warm‐white‐emitting phosphor could be of great advantage. Herein, we report the synthesis of a novel nitridophosphate zeolite Ba₃P₅N₁₀Br:Eu²⁺. Upon excitation by near‐UV light, natural‐white‐light luminescence was detected. The synthesis of Ba₃P₅N₁₀Br:Eu²⁺ was carried out using the multianvil technique. The crystal structure of Ba₃P₅N₁₀Br:Eu²⁺ was solved and refined by single‐crystal X‐ray diffraction analysis and confirmed by Rietveld refinement and FTIR spectroscopy. Furthermore, spectroscopic luminescence measurements were performed. Through the synthesis of Ba₃P₅N₁₀Br:Eu²⁺, we have shown the great potential of nitridophosphate zeolites to serve as high‐performance luminescence materials.     

低温燃料电池的纳米电催化材料:综述(英文)

Low temperature fuel cells are an attractive technology for transportation and residential applica‐tions due to their quick start up and shut down capabilities. This review analyzed the current status of nanocatalysts for proton exchange membrane fuel cells and alkaline membrane fuel cells. The preparation process influences the performance of the nanocatalyst. Several synthesis methods are covered for noble and non‐noble metal catalysts on various catalyst supports including carbon nanotubes, carbon nanofibers, nanowires, and graphenes. Ex situ and in situ characterization methods like scanning electron microscopy, transmission electron microscopy, X‐ray photoelectron spectroscopy and fuel cell testing of the nanocatalysts on various supports for both proton exchange and alkaline membrane fuel cells are discussed. The accelerated durability estimate of the nanocat‐alysts, predicted by measuring changes in the electrochemically active surface area using a voltage cycling method, is considered one of the most reliable and valuable method for establishing durabil‐ity.     

TiO2修饰La0.6Sr0.4Co0.2Fe0.8O3-δ用于中温固体氧化物燃料电池的阴极

纳米TiO2修饰的La0.6Sr0.4Co0.2Fe0.8O3-δ(LSCF)阴极被直接应用于YSZ电解质电池上. TiO2可阻止LSCF和YSZ间的化学反应,抑制SrZrO3的形成. LSCF-0.25 wt% TiO2阴极电池在0.7 V和600°C下的电流密度是LSCF阴极电池的1.6倍.电化学阻抗谱结果表明, TiO2修饰显著加快了氧离子注入电解质的过程,这可能与TiO2抑制了阴极/电解质界面处高电阻SrZrO3层的形成有关.本文为在ZrO2基电解质上使用高性能的(La,Sr)(Co,Fe)O3阴极材料提供了一种简单有效的方法.     

预处理温度对甘油氢解双金属Ir-Re催化剂性能的影响

在生物柴油生产过程中大量副产的甘油是重要的生物质转化平台化合物.通过甘油氢解制备高附加值的1,3-丙二醇是甘油的资源化利用的重要途径,能够显著提高生物柴油产业的经济效益,同时也是探究更复杂的糖醇类化合物氢解的模型反应.因此,甘油氢解制备1,3-丙二醇成为当前学术界的研究热点.通常,以Re或W为助剂修饰的贵金属催化剂是有效的甘油选择性氢解制1,3-丙二醇的催化剂,其中,双金属Ir-Re催化剂是目前最高效的催化剂之一.甘油氢解反应是典型的结构敏感性反应,它的催化性能依赖于双金属催化剂的结构,而后者受制备工艺条件如热处理方式及条件的影响.最近,我们报道了以直接还原法(即浸渍-还原法)制备的Ir-Re催化剂为合金结构,在甘油氢解中表现出更为优越的反应活性及目前报道中最高的1,3-丙二醇生成速率,并提出了可能的双功能反应机理,即催化剂表面的Re-OH酸性位和Ir均为甘油氢解的活性位.本文采用直接还原法制备KIT-6(具有三维有序介孔孔道结构的SiO2)负载的双金属Ir-Re催化剂,进一步研究还原温度对Ir-Re/KIT-6的结构及其催化性能的影响,揭示催化剂表面酸性在甘油氢解反应中的重要作用并阐明其构-效关系.结果显示不同还原温度(400–700 oC)制备的催化剂的比表面积、孔体积及孔径数据基本一致,表明还原温度对Ir-Re/KIT-6的织构性质的影响很小.根据程序升温还原和透射电镜-能量散射点扫描结果可知,不同温度还原后的催化剂表面Ir和Re均以金属态形式存在,同时两者存在直接的相互作用,形成了Ir-Re合金;而漫反射红外图谱上CO吸附峰的红移以及峰形的显著变化也印证了Ir-Re合金结构的形成. TEM结果显示,在400–700oC还原后得到的Ir-Re合金纳米粒子均匀分布于KIT-6上,尺寸基本一致(2.5–2.8 nm),与CO化学吸附结果一致.此外, NH3-程序升温脱附结果表明催化剂的酸量随着还原温度的升高而逐渐增大,但酸强度没有明显变化,这可能是由于高温还原进一步促进了Ir和Re的相互作用,在原子尺度上混合更为均匀所致. Ir-Re催化剂上甘油氢解反应结果显示,随着还原温度由400提高到600 oC,所制催化剂的活性先增加而后趋于稳定.由此可以认为Ir-Re催化性能的差异与Ir分散度和酸强度的关联较小,主要是由于催化剂表面酸量所致.直接关联酸量与反应活性(以反应时间内的平均1,3-丙二醇生成速率表示)可以看到,反应活性随着酸量的增加而线性增大,表明Ir-Re/KIT-6的表面酸量直接影响了甘油氢解反应速率的快慢,即酸位Re-OH直接参与了催化反应.众所周知, Re金属活化H2的能力很弱,而金属Ir在反应中起到催化加氢的作用.实验结果很好地印证了Ir-Re合金催化甘油氢解反应的双功能反应机理,即酸位Re-OH与金属Ir协同参与氢解反应,分别作为甘油吸附位和H2活化中心,因此提高催化剂的表面Re-OH的数量将是进一步提高催化活性的途径之一.总的来说,在400–700 oC还原得到的Ir-Re/KIT-6催化剂具有Ir-Re合金结构.还原温度对催化剂的织构性质、金属纳米粒子的尺寸、Ir的分散度及表面酸强度的影响不大,但还原温度的升高有利于Ir和Re的相互作用,显著提高了催化剂的表面酸量,因而提高催化活性.此外,表面酸量和反应活性的线性关系表明酸位Re-OH参与Ir-Re合金催化甘油氢解反应,印证了双功能反应机理.     

焙烧温度对LaSrFeMo0.9Co0.1O6催化剂催化甲烷燃烧性能的影响

采用溶胶凝胶法制备LaSrFeMo0.9Co0.1O6,以催化甲烷燃烧为目标反应,研究不同焙烧温度(600、700、800、900℃)对其催化甲烷燃烧性能的影响.通过XRD、BET、H2-TPR及SEM技术对其结构进行表征.结果表明,在不同的焙烧温度下均可形成完整的双钙钛矿晶型,且焙烧温度不同其催化活性不同,随着焙烧温度的升高其催化活性先升高后逐渐降低.当焙烧温度为800℃,样品比表面积为14 m2/g,起燃温度T10％为428℃,T90％为640℃.     

Using controlled radical polymerization to confirm the lower critical solution temperature of an N‐(alkoxyalkyl) acrylamide polymer in aqueous solution

N‐(3‐Methoxypropyl) acrylamide (MPAM) was polymerized by controlled radical polymerization (CRP) methods such as nitroxide‐mediated polymerization (NMP) and reversible addition–fragmentation chain‐transfer polymerization (RAFT). CRP was expected to yield well‐defined polymers with sharp lower critical solution temperature (LCST) transitions. NMP with the BlocBuilder (2‐([tert‐butyl[1‐(diethoxyphosphoryl)‐2,2‐dimethylpropyl]amino]oxy)‐2‐methylpropanoic acid) and SG1 ([tert‐butyl[1‐(diethoxyphosphoryl)‐2,2‐dimethylpropyl]amino] oxidanyl) initiating system revealed low yields and lack of control (high dispersity, ? ～ 1.5–1.6, and inhibition of chain growth). However, RAFT was far more effective, with linear number average molecular weight, , versus conversion, X, plots, low ? ～ 1.2–1.4 and the ability to form block copolymers using N,N‐diethylacrylamide (DEAAM) as the second monomer. Poly(MPAM) (with = 13.7–25.3 kg mol^?1) thermoresponsive behavior in aqueous media revealed cloud point temperatures (CPT)s between 73 and 92 °C depending on solution concentration (ranging from 1 to 3 wt %). The and the molecular weight distribution were the key factors determining the CPT and the sharpness of the response, respectively. Poly(MPAM)‐b‐poly(DEAAM) block copolymer ( = 22.3 kg mol^?1, ? = 1.41, molar composition F_DEAAM = 0.38) revealed dual LCSTs with both segments revealing distinctive CPTs (at 75 and 37 °C for poly(MPAM) and poly(DEAAM) blocks, respectively) by both UV–Vis and dynamic light scattering. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 59–67     

Void‐Assisted Ion‐Paired Proton Transfer at Water–Ionic Liquid Interfaces

At the water–trihexyl(tetradecyl)phosphonium tris(pentafluoroethyl)trifluorophosphate ([P_14,6,6,6][FAP]) ionic liquid interface, the unusual electrochemical transfer behavior of protons (H⁺) and deuterium ions (D⁺) was identified. Alkali metal cations (such as Li⁺, Na⁺, K⁺) did not undergo this transfer. H⁺/D⁺ transfers were assisted by the hydrophobic counter anion of the ionic liquid, [FAP]^?, resulting in the formation of a mixed capacitive layer from the filling of the latent voids within the anisotropic ionic liquid structure. This phenomenon could impact areas such as proton‐coupled electron transfers, fuel cells, and hydrogen storage where ionic liquids are used as aprotic solvents.